/SLAM-Hive/slam_hive_results/mapping_results/672/324_orb-slam3-ros-stereo-inertial+MH_01_easy+comb_test_2-8.yamlERROR: Unable to communicate with master!
... logging to /root/.ros/log/fd524f9c-172f-11ef-83f9-0242ac110005/roslaunch-668dd7262eba-71.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.
]2;/slamhive/stereo-inertial.launch
[1mstarted roslaunch server http://668dd7262eba:44011/[0m

SUMMARY
========

PARAMETERS
 * /rosdistro: melodic
 * /rosversion: 1.14.13
 * /use_sim_time: True

NODES
  /
    orb_node (ORB_SLAM3/Stereo_Inertial)

auto-starting new master
[1mprocess[master]: started with pid [86][0m
[1mROS_MASTER_URI=http://localhost:11311[0m
]2;/slamhive/stereo-inertial.launch http://localhost:11311
[1msetting /run_id to fd524f9c-172f-11ef-83f9-0242ac110005[0m
[1mprocess[rosout-1]: started with pid [97][0m
started core service [/rosout]
[1mprocess[orb_node-2]: started with pid [102][0m

ORB-SLAM3 Copyright (C) 2017-2020 Carlos Campos, Richard Elvira, Juan J. Gómez, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
ORB-SLAM2 Copyright (C) 2014-2016 Raúl Mur-Artal, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
This program comes with ABSOLUTELY NO WARRANTY;
This is free software, and you are welcome to redistribute it
under certain conditions. See LICENSE.txt.

Input sensor was set to: Stereo-Inertial

Loading ORB Vocabulary. This could take a while...
Vocabulary loaded!

Initialization of Atlas from scratch 
Creation of new map with id: 0
Creation of new map with last KF id: 0
Seq. Name: 

Camera Parameters: 
- Camera: Pinhole
- Image scale: 1
- fx: 435.205
- fy: 435.205
- cx: 367.452
- cy: 252.201
- k1: 0
- k2: 0
- p1: 0
- p2: 0
- fps: 20
- color order: RGB (ignored if grayscale)

Depth Threshold (Close/Far Points): 3.85272

ORB Extractor Parameters: 
- Number of Features: 1000
- Scale Levels: 8
- Scale Factor: 1.2
- Initial Fast Threshold: 20
- Minimum Fast Threshold: 7

Left camera to Imu Transform (Tbc): 
[0.014865543, -0.99988091, 0.004140297, -0.021640146;
 0.99955726, 0.014967213, 0.02571553, -0.064676985;
 -0.025774436, 0.0037561883, 0.99966073, 0.0098107308;
 0, 0, 0, 1]

IMU frequency: 50 Hz
IMU gyro noise: 0.00017 rad/s/sqrt(Hz)
IMU gyro walk: 1.9393e-05 rad/s^2/sqrt(Hz)
IMU accelerometer noise: 0.002 m/s^2/sqrt(Hz)
IMU accelerometer walk: 0.003 m/s^3/sqrt(Hz)
There are 1 cameras in the atlas
Camera 0 is pinhole
rosbag play /slamhive/dataset/MH_01_easy.bag /cam0/image_raw:=/camera/left/image_raw /cam1/image_raw:=/camera/right/image_raw /imu0:=/imu --clock 
[0m[ INFO] [1716268055.245396943]: Opening /slamhive/dataset/MH_01_easy.bag[0m

Waiting 0.2 seconds after advertising topics... done.

Hit space to toggle paused, or 's' to step.

 [DELAYED]  Bag Time: 1403636578.946206   Duration: 0.000000 / 187.749443   Delay: 0.00 
not IMU meas
First KF:0; Map init KF:0
New Map created with 375 points
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 1
mnInitialFrameId = 0
2 Frames set to lost
not IMU meas
First KF:2; Map init KF:0
New Map created with 35 points
TRACK_REF_KF: Less than 15 matches!!
Fail to track local map!
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 5
mnInitialFrameId = 3
3 Frames set to lost
not IMU meas
First KF:3; Map init KF:2
New Map created with 21 points
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 8
mnInitialFrameId = 6
4 Frames set to lost
not IMU meas
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 8
mnInitialFrameId = 9
3 Frames set to lost
not IMU meas
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 8
mnInitialFrameId = 11
1 Frames set to lost
not IMU meas
First KF:4; Map init KF:3
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 15
mnInitialFrameId = 13
5 Frames set to lost
not IMU meas
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 15
mnInitialFrameId = 16
4 Frames set to lost
not IMU meas
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
not enough acceleration
First KF:5; Map init KF:4
New Map created with 175 points
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 67
mnInitialFrameId = 40
7 Frames set to lost
not IMU meas
not enough acceleration
not enough acceleration
First KF:6; Map init KF:5
New Map created with 185 points
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 73
mnInitialFrameId = 69
49 Frames set to lost
not IMU meas
First KF:24; Map init KF:6
New Map created with 237 points
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 116
mnInitialFrameId = 114
51 Frames set to lost
not IMU meas
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 116
mnInitialFrameId = 118
49 Frames set to lost
not IMU meas
First KF:25; Map init KF:24
New Map created with 500 points
Timestamp jump detected, before IMU initialization. Reseting...
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 122
mnInitialFrameId = 120
65 Frames set to lost
not IMU meas
First KF:31; Map init KF:25
New Map created with 551 points
RESETING FRAME!!!
[31m[orb_node-2] process has died [pid 102, exit code -11, cmd /home/ORB_SLAM3/Examples/ROS/ORB_SLAM3/Stereo_Inertial /home/ORB_SLAM3/Vocabulary/ORBvoc.txt /slamhive/mappingtask.yaml true /camera/left/image_raw:=/camera/left/image_raw /camera/right/image_raw:=/camera/right/image_raw /imu:=/imu __name:=orb_node __log:=/root/.ros/log/fd524f9c-172f-11ef-83f9-0242ac110005/orb_node-2.log].
log file: /root/.ros/log/fd524f9c-172f-11ef-83f9-0242ac110005/orb_node-2*.log[0m

Done.
killing:
 * /orb_node
 * /rosout
[33m[ WARN] [1716268249.169853057, 1403636766.688429964]: Shutdown request received.[0m
[33m[ WARN] [1716268249.169885392, 1403636766.688429964]: Reason given for shutdown: [user request][0m
killed
[1m[rosout-1] process has finished cleanly
log file: /root/.ros/log/fd524f9c-172f-11ef-83f9-0242ac110005/rosout-1*.log[0m
[rosout-1] restarting process
[1mprocess[rosout-1]: started with pid [471][0m
mv: cannot stat '/home/ORB_SLAM3/Examples/ROS/ORB_SLAM3/KeyFrameTrajectory_TUM_Format.txt': No such file or directory
