/SLAM-Hive/slam_hive_results/mapping_results/2419/1405_orb-slam3-ros-mono-inertial+MH_05_difficult+Image_comb_test-10.yamlERROR: Unable to communicate with master!
... logging to /root/.ros/log/93d2b34a-3c00-11ef-a010-0242ac110003/roslaunch-42758afda758-70.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.
]2;/slamhive/mono-inertial.launch
[1mstarted roslaunch server http://42758afda758:34193/[0m

SUMMARY
========

PARAMETERS
 * /rosdistro: melodic
 * /rosversion: 1.14.13
 * /use_sim_time: True

NODES
  /
    orb_node (ORB_SLAM3/Mono_Inertial)

auto-starting new master
[1mprocess[master]: started with pid [85][0m
[1mROS_MASTER_URI=http://localhost:11311[0m
]2;/slamhive/mono-inertial.launch http://localhost:11311
[1msetting /run_id to 93d2b34a-3c00-11ef-a010-0242ac110003[0m
[1mprocess[rosout-1]: started with pid [96][0m
started core service [/rosout]
[1mprocess[orb_node-2]: started with pid [102][0m

ORB-SLAM3 Copyright (C) 2017-2020 Carlos Campos, Richard Elvira, Juan J. Gómez, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
ORB-SLAM2 Copyright (C) 2014-2016 Raúl Mur-Artal, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
This program comes with ABSOLUTELY NO WARRANTY;
This is free software, and you are welcome to redistribute it
under certain conditions. See LICENSE.txt.

Input sensor was set to: Monocular-Inertial
Loading settings from /slamhive/mappingtask.yaml
Camera1.k3 optional parameter does not exist...
	-Loaded camera 1
	-Loaded image info
IMU.InsertKFsWhenLost optional parameter does not exist...
	-Loaded IMU calibration
	-Loaded ORB settings
Viewer.imageViewScale optional parameter does not exist...
	-Loaded viewer settings
System.LoadAtlasFromFile optional parameter does not exist...
System.SaveAtlasToFile optional parameter does not exist...
	-Loaded Atlas settings
System.thFarPoints optional parameter does not exist...
	-Loaded misc parameters
----------------------------------
SLAM settings: 
	-Camera 1 parameters (Pinhole): [ 183.462 182.918 146.886 99.35 ]
	-Camera 1 distortion parameters: [  -0.283408 0.0739591 0.00019359 1.76187e-05 ]
	-Original image size: [ 300 , 192 ]
	-Current image size: [ 240 , 140 ]
	-Camera 1 parameters after resize: [  146.769 133.378 117.509 72.4427 ]
	-Sequence FPS: 10
	-Gyro noise: 0.00017
	-Accelerometer noise: 0.002
	-Gyro walk: 1.9393e-05
	-Accelerometer walk: 0.003
	-IMU frequency: 200
	-Features per image: 1000
	-ORB scale factor: 1.2
	-ORB number of scales: 8
	-Initial FAST threshold: 20
	-Min FAST threshold: 7


Loading ORB Vocabulary. This could take a while...
Vocabulary loaded!

Initialization of Atlas from scratch 
Creation of new map with id: 0
Creation of new map with last KF id: 0
Seq. Name: 
There are 1 cameras in the atlas
Camera 0 is pinhole
rosbag play /slamhive/dataset/MH_05_difficult.bag /cam0/image_raw:=/camera/image_raw /imu0:=/imu --clock 
[0m[ INFO] [1720315885.065692282]: Opening /slamhive/dataset/MH_05_difficult.bag[0m

Waiting 0.2 seconds after advertising topics... done.

Hit space to toggle paused, or 's' to step.

 [DELAYED]  Bag Time: 1403638518.147706   Duration: 0.000000 / 114.773304   Delay: 0.00 
First KF:0; Map init KF:0
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:6; Map init KF:0
New Map created with 118 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 74
mnInitialFrameId = 60
40 Frames set to lost
First KF:17; Map init KF:6
New Map created with 111 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:21; Map init KF:17
New Map created with 120 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 221
mnInitialFrameId = 118
75 Frames set to lost
First KF:32; Map init KF:21
scale too small
scale too small
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 250
mnInitialFrameId = 246
104 Frames set to lost
First KF:43; Map init KF:32
New Map created with 202 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 281
mnInitialFrameId = 278
130 Frames set to lost
First KF:54; Map init KF:43
New Map created with 331 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:65; Map init KF:54
New Map created with 143 points
scale too small
scale too small
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:78; Map init KF:65
New Map created with 218 points
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:85; Map init KF:78
New Map created with 264 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 388
mnInitialFrameId = 386
215 Frames set to lost
First KF:90; Map init KF:85
New Map created with 342 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:101; Map init KF:90
New Map created with 162 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:104; Map init KF:101
New Map created with 113 points
scale too small
scale too small
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:117; Map init KF:104
New Map created with 174 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 467
mnInitialFrameId = 464
290 Frames set to lost
First KF:123; Map init KF:117
scale too small
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 496
mnInitialFrameId = 479
319 Frames set to lost
First KF:135; Map init KF:123
New Map created with 150 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:141; Map init KF:135
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:146; Map init KF:141
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:149; Map init KF:146
New Map created with 166 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:152; Map init KF:149
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:155; Map init KF:152
New Map created with 143 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 835
mnInitialFrameId = 819
366 Frames set to lost
First KF:158; Map init KF:155
New Map created with 82 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:162; Map init KF:158
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 864
mnInitialFrameId = 850
399 Frames set to lost
First KF:173; Map init KF:162
New Map created with 315 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:179; Map init KF:173
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
First KF:190; Map init KF:179
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
First KF:201; Map init KF:190
New Map created with 208 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:207; Map init KF:201
New Map created with 111 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:218; Map init KF:207
New Map created with 106 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 1010
mnInitialFrameId = 1006
First KF:229; Map init KF:218
New Map created with 216 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 1041
mnInitialFrameId = 1035
558 Frames set to lost
First KF:240; Map init KF:229
New Map created with 231 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 1070
mnInitialFrameId = 1067
585 Frames set to lost

Done.
killing:
 * /orb_node
 * /rosout
[33m[ WARN] [1720316006.055038278, 1403638632.918488980]: Shutdown request received.[0m
[33m[ WARN] [1720316006.055915925, 1403638632.918488980]: Reason given for shutdown: [user request][0m
[33m[ WARN] [1720316006.072117081, 1403638632.918488980]: Shutdown request received.[0m
[33m[ WARN] [1720316006.072172084, 1403638632.918488980]: Reason given for shutdown: [user request][0m
killed
Shutdown

Saving keyframe trajectory to KeyFrameTrajectory.txt ...
Map Saving to Map.pcd
Map Saving Finished!
terminate called without an active exception
[1m[rosout-1] process has finished cleanly
log file: /root/.ros/log/93d2b34a-3c00-11ef-a010-0242ac110003/rosout-1*.log[0m
[rosout-1] restarting process
[1mprocess[rosout-1]: started with pid [629][0m
[31m[orb_node-2] process has died [pid 102, exit code -6, cmd /home/ORB_SLAM3/Examples/ROS/ORB_SLAM3/Mono_Inertial /home/ORB_SLAM3/Vocabulary/ORBvoc.txt /slamhive/mappingtask.yaml /camera/image_raw:=/camera/image_raw /imu:=/imu __name:=orb_node __log:=/root/.ros/log/93d2b34a-3c00-11ef-a010-0242ac110003/orb_node-2.log].
log file: /root/.ros/log/93d2b34a-3c00-11ef-a010-0242ac110003/orb_node-2*.log[0m
