/SLAM-Hive/slam_hive_results/mapping_results/2321/1414_orb-slam3-ros-mono-inertial+MH_05_difficult+Image_comb_test-19.yamlERROR: Unable to communicate with master!
... logging to /root/.ros/log/97ba550e-3bd2-11ef-b246-0242ac110003/roslaunch-68a0ae89ab82-70.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.
]2;/slamhive/mono-inertial.launch
[1mstarted roslaunch server http://68a0ae89ab82:38301/[0m

SUMMARY
========

PARAMETERS
 * /rosdistro: melodic
 * /rosversion: 1.14.13
 * /use_sim_time: True

NODES
  /
    orb_node (ORB_SLAM3/Mono_Inertial)

auto-starting new master
[1mprocess[master]: started with pid [85][0m
[1mROS_MASTER_URI=http://localhost:11311[0m
]2;/slamhive/mono-inertial.launch http://localhost:11311
[1msetting /run_id to 97ba550e-3bd2-11ef-b246-0242ac110003[0m
[1mprocess[rosout-1]: started with pid [96][0m
started core service [/rosout]
[1mprocess[orb_node-2]: started with pid [102][0m

ORB-SLAM3 Copyright (C) 2017-2020 Carlos Campos, Richard Elvira, Juan J. Gómez, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
ORB-SLAM2 Copyright (C) 2014-2016 Raúl Mur-Artal, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
This program comes with ABSOLUTELY NO WARRANTY;
This is free software, and you are welcome to redistribute it
under certain conditions. See LICENSE.txt.

Input sensor was set to: Monocular-Inertial
Loading settings from /slamhive/mappingtask.yaml
Camera1.k3 optional parameter does not exist...
	-Loaded camera 1
	-Loaded image info
IMU.InsertKFsWhenLost optional parameter does not exist...
	-Loaded IMU calibration
	-Loaded ORB settings
Viewer.imageViewScale optional parameter does not exist...
	-Loaded viewer settings
System.LoadAtlasFromFile optional parameter does not exist...
System.SaveAtlasToFile optional parameter does not exist...
	-Loaded Atlas settings
System.thFarPoints optional parameter does not exist...
	-Loaded misc parameters
----------------------------------
SLAM settings: 
	-Camera 1 parameters (Pinhole): [ 366.923 365.837 293.772 198.7 ]
	-Camera 1 distortion parameters: [  -0.283408 0.0739591 0.00019359 1.76187e-05 ]
	-Original image size: [ 601 , 384 ]
	-Current image size: [ 480 , 280 ]
	-Camera 1 parameters after resize: [  293.05 266.756 234.627 144.885 ]
	-Sequence FPS: 2
	-Gyro noise: 0.00017
	-Accelerometer noise: 0.002
	-Gyro walk: 1.9393e-05
	-Accelerometer walk: 0.003
	-IMU frequency: 200
	-Features per image: 1000
	-ORB scale factor: 1.2
	-ORB number of scales: 8
	-Initial FAST threshold: 20
	-Min FAST threshold: 7


Loading ORB Vocabulary. This could take a while...
Vocabulary loaded!

Initialization of Atlas from scratch 
Creation of new map with id: 0
Creation of new map with last KF id: 0
Seq. Name: 
There are 1 cameras in the atlas
Camera 0 is pinhole
rosbag play /slamhive/dataset/MH_05_difficult.bag /cam0/image_raw:=/camera/image_raw /imu0:=/imu --clock 
[0m[ INFO] [1720296134.784611369]: Opening /slamhive/dataset/MH_05_difficult.bag[0m

Waiting 0.2 seconds after advertising topics...First KF:0; Map init KF:0
New Map created with 227 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
New Map created with 123 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 18
mnInitialFrameId = 15
8 Frames set to lost
First KF:10; Map init KF:3
New Map created with 81 points
start VIBA 1
end VIBA 1
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:27; Map init KF:10
New Map created with 100 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:31; Map init KF:27
New Map created with 256 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:35; Map init KF:31
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 53
mnInitialFrameId = 51
34 Frames set to lost
First KF:40; Map init KF:35
New Map created with 348 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:44; Map init KF:40
New Map created with 249 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:49; Map init KF:44
New Map created with 364 points
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 67
mnInitialFrameId = 65
46 Frames set to lost
First KF:55; Map init KF:49
New Map created with 204 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 83
mnInitialFrameId = 71
49 Frames set to lost
First KF:59; Map init KF:55
New Map created with 434 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:64; Map init KF:59
New Map created with 242 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
First KF:68; Map init KF:64
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:70; Map init KF:68
New Map created with 328 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:76; Map init KF:70
New Map created with 124 points
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:81; Map init KF:76
New Map created with 85 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
scale too small
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 145
mnInitialFrameId = 113
75 Frames set to lost
First KF:91; Map init KF:81
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:98; Map init KF:91
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:108; Map init KF:98
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:114; Map init KF:108
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:120; Map init KF:114
New Map created with 528 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...

Done.
killing:
 * /orb_node
 * /rosout
[33m[ WARN] [1720296255.598691772, 1403638632.919958682]: Shutdown request received.[0m
[33m[ WARN] [1720296255.599614998, 1403638632.919958682]: Reason given for shutdown: [user request][0m
[33m[ WARN] [1720296255.616041229, 1403638632.919958682]: Shutdown request received.[0m
[33m[ WARN] [1720296255.616070475, 1403638632.919958682]: Reason given for shutdown: [user request][0m
killed
Shutdown

Saving keyframe trajectory to KeyFrameTrajectory.txt ...
Map Saving to Map.pcd
Map Saving Finished!
terminate called without an active exception
[1m[rosout-1] process has finished cleanly
log file: /root/.ros/log/97ba550e-3bd2-11ef-b246-0242ac110003/rosout-1*.log[0m
[rosout-1] restarting process
[1mprocess[rosout-1]: started with pid [257][0m
[31m[orb_node-2] process has died [pid 102, exit code -6, cmd /home/ORB_SLAM3/Examples/ROS/ORB_SLAM3/Mono_Inertial /home/ORB_SLAM3/Vocabulary/ORBvoc.txt /slamhive/mappingtask.yaml /camera/image_raw:=/camera/image_raw /imu:=/imu __name:=orb_node __log:=/root/.ros/log/97ba550e-3bd2-11ef-b246-0242ac110003/orb_node-2.log].
log file: /root/.ros/log/97ba550e-3bd2-11ef-b246-0242ac110003/orb_node-2*.log[0m
