/SLAM-Hive/slam_hive_results/mapping_results/1089/743_orb-slam3-ros-mono-inertial+right_camera+MH_01_easy+exploration_experiment_2-5.yamlERROR: Unable to communicate with master!
... logging to /root/.ros/log/f8614f60-243b-11ef-b187-0242ac110004/roslaunch-14d383ebddbc-70.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.
]2;/slamhive/mono-inertial.launch
[1mstarted roslaunch server http://14d383ebddbc:34881/[0m

SUMMARY
========

PARAMETERS
 * /rosdistro: melodic
 * /rosversion: 1.14.13
 * /use_sim_time: True

NODES
  /
    orb_node (ORB_SLAM3/Mono_Inertial)

auto-starting new master
[1mprocess[master]: started with pid [85][0m
[1mROS_MASTER_URI=http://localhost:11311[0m
]2;/slamhive/mono-inertial.launch http://localhost:11311
[1msetting /run_id to f8614f60-243b-11ef-b187-0242ac110004[0m
[1mprocess[rosout-1]: started with pid [96][0m
started core service [/rosout]
[1mprocess[orb_node-2]: started with pid [102][0m

ORB-SLAM3 Copyright (C) 2017-2020 Carlos Campos, Richard Elvira, Juan J. Gómez, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
ORB-SLAM2 Copyright (C) 2014-2016 Raúl Mur-Artal, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
This program comes with ABSOLUTELY NO WARRANTY;
This is free software, and you are welcome to redistribute it
under certain conditions. See LICENSE.txt.

Input sensor was set to: Monocular-Inertial
Loading settings from /slamhive/mappingtask.yaml
Camera1.k3 optional parameter does not exist...
	-Loaded camera 1
	-Loaded image info
IMU.InsertKFsWhenLost optional parameter does not exist...
	-Loaded IMU calibration
	-Loaded ORB settings
Viewer.imageViewScale optional parameter does not exist...
	-Loaded viewer settings
System.LoadAtlasFromFile optional parameter does not exist...
System.SaveAtlasToFile optional parameter does not exist...
	-Loaded Atlas settings
System.thFarPoints optional parameter does not exist...
	-Loaded misc parameters
----------------------------------
SLAM settings: 
	-Camera 1 parameters (Pinhole): [ 229.327 228.648 183.607 124.188 ]
	-Camera 1 distortion parameters: [  -0.283408 0.0739591 0.00019359 1.76187e-05 ]
	-Original image size: [ 376 , 240 ]
	-Current image size: [ 300 , 175 ]
	-Camera 1 parameters after resize: [  182.974 166.723 146.495 90.5534 ]
	-Sequence FPS: 10
	-Gyro noise: 0.00017
	-Accelerometer noise: 0.002
	-Gyro walk: 1.9393e-05
	-Accelerometer walk: 0.003
	-IMU frequency: 200
	-Features per image: 1000
	-ORB scale factor: 1.2
	-ORB number of scales: 8
	-Initial FAST threshold: 20
	-Min FAST threshold: 7


Loading ORB Vocabulary. This could take a while...
Vocabulary loaded!

Initialization of Atlas from scratch 
Creation of new map with id: 0
Creation of new map with last KF id: 0
Seq. Name: 
There are 1 cameras in the atlas
Camera 0 is pinhole
rosbag play /slamhive/dataset/MH_02_easy.bag /cam1/image_raw:=/camera/image_raw /imu0:=/imu --clock 
[0m[ INFO] [1717702566.179624936]: Opening /slamhive/dataset/MH_02_easy.bag[0m

Waiting 0.2 seconds after advertising topics... done.

Hit space to toggle paused, or 's' to step.

 [DELAYED]  Bag Time: 1403636856.854208   Duration: 0.000000 / 153.782490   Delay: 0.00 
First KF:0; Map init KF:0
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:3; Map init KF:0
New Map created with 164 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 8
mnInitialFrameId = 6
7 Frames set to lost
First KF:5; Map init KF:3
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 12
mnInitialFrameId = 10
16 Frames set to lost
First KF:9; Map init KF:5
New Map created with 189 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
mnFirstFrameId = 29
mnInitialFrameId = 20
23 Frames set to lost
First KF:13; Map init KF:9
New Map created with 241 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 41
mnInitialFrameId = 35
27 Frames set to lost
First KF:16; Map init KF:13
New Map created with 538 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 46
mnInitialFrameId = 44
31 Frames set to lost
First KF:19; Map init KF:16
New Map created with 175 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 51
mnInitialFrameId = 49
38 Frames set to lost
First KF:23; Map init KF:19
New Map created with 392 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 59
mnInitialFrameId = 57
46 Frames set to lost
First KF:27; Map init KF:23
New Map created with 104 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 72
mnInitialFrameId = 66
48 Frames set to lost
First KF:29; Map init KF:27
New Map created with 356 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:34; Map init KF:29
start VIBA 1
end VIBA 1
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 88
mnInitialFrameId = 85
161 Frames set to lost
First KF:89; Map init KF:34
New Map created with 258 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 215
mnInitialFrameId = 189
166 Frames set to lost
First KF:92; Map init KF:89
New Map created with 246 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 221
mnInitialFrameId = 219
173 Frames set to lost
First KF:96; Map init KF:92
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
TRACK: Reset map because local mapper set the bad imu flag 
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
mnFirstFrameId = 250
mnInitialFrameId = 227
229 Frames set to lost
First KF:115; Map init KF:96
New Map created with 187 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:118; Map init KF:115
New Map created with 135 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:121; Map init KF:118
New Map created with 245 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:124; Map init KF:121
New Map created with 234 points
virtual int g2o::SparseOptimizer::optimize(int, bool): 0 vertices to optimize, maybe forgot to call initializeOptimization()
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:133; Map init KF:124
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 436
mnInitialFrameId = 431
285 Frames set to lost
First KF:141; Map init KF:133
scale too small
scale too small
scale too small
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
Not enough motion for initializing. Reseting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
mnFirstFrameId = 457
mnInitialFrameId = 455
320 Frames set to lost
First KF:155; Map init KF:141
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:158; Map init KF:155
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
First KF:162; Map init KF:158
New Map created with 232 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
LM: Reseting current map in Local Mapping...
LM: End reseting Local Mapping...
LM: Reset free the mutex
LM: Active map reset, Done!!!
First KF:165; Map init KF:162
New Map created with 257 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:168; Map init KF:165
New Map created with 180 points
Fail to track local map!
IMU is not or recently initialized. Reseting active map...
SYSTEM-> Reseting active map in monocular case
LM: Active map reset recieved
LM: Active map reset, waiting...
First KF:179; Map init KF:168
New Map created with 307 points
start VIBA 1
end VIBA 1
start VIBA 2
end VIBA 2

Done.
killing:
 * /orb_node
 * /rosout
[33m[ WARN] [1717702725.838233941, 1403637010.626850588]: Shutdown request received.[0m
[33m[ WARN] [1717702725.839215958, 1403637010.626850588]: Reason given for shutdown: [user request][0m
[33m[ WARN] [1717702725.856692579, 1403637010.626850588]: Shutdown request received.[0m
[33m[ WARN] [1717702725.856720639, 1403637010.626850588]: Reason given for shutdown: [user request][0m
killed
Shutdown

Saving keyframe trajectory to KeyFrameTrajectory.txt ...
Map Saving to Map.pcd
Map Saving Finished!
terminate called without an active exception
[1m[rosout-1] process has finished cleanly
log file: /root/.ros/log/f8614f60-243b-11ef-b187-0242ac110004/rosout-1*.log[0m
[rosout-1] restarting process
[1mprocess[rosout-1]: started with pid [419][0m
[31m[orb_node-2] process has died [pid 102, exit code -6, cmd /home/ORB_SLAM3/Examples/ROS/ORB_SLAM3/Mono_Inertial /home/ORB_SLAM3/Vocabulary/ORBvoc.txt /slamhive/mappingtask.yaml /camera/image_raw:=/camera/image_raw /imu:=/imu __name:=orb_node __log:=/root/.ros/log/f8614f60-243b-11ef-b187-0242ac110004/orb_node-2.log].
log file: /root/.ros/log/f8614f60-243b-11ef-b187-0242ac110004/orb_node-2*.log[0m
